Karakteristika

▲ Luɔ̈ɔ̈i de kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ
▲ Masin bɛɛ̈n ee tɛ̈n yenë kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔ
▲ Ajuiɛɛr de kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ
▲ Ngam ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye
▲ Wind return and regeneration are all equipped with high precision filters, ensuring that the honeycomb wheel is not contaminated by dust. ▲ Wind return and regeneration are all equipped with high precision filters, ensuring that the honeycomb wheel is not contaminated by dust. ▲ Wind return and regeneration are
▲ Ventilation ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling ye luɔɔi de cooling
▲ P.l.D tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
▲ Standard ye tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në t a lëu bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u bɛ̈n tɔ̈ɔ̈u
▲ A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈
▲ Structure compact, look beautiful, maintenance convenient, failure rate low. ▲ Structure compact, look beautiful, maintenance convenient, failure rate low. ▲ Structure compact, look beautiful, maintenance convenient, failure rate low.

▲ Adopt imported high quality honeycomb rotor, which features effective dehumidifying, long life and low maintenance cost.
▲ The machine features optimized design of piping system, applying the most reasonable and simplified layout of the pipes to reduce the pressure loss and energy consumption, and increase air Volume of the system.
▲ Environment-friendly design, regeneration heating system made with high performance insulation materials and rotor working areas are sealed and insulated to avoid heat dissipation,saving energy up to 30% as compared to other traditional dehumidifiers.
▲ By using of the new type of honeycomb,which only requires 150℃ regeneration temperature as compared with 200℃ regeneration tempaerature of molecular sieve honeycomb rotor,energy can be saved up to 40%.
▲ High performance filters for both return and regeneration air to avoid contamination of the rotor by dusts.
▲ Double cooling system for return air can protect the blower and get lower return air temperature to ensure the low dew-point of the dry air.
▲ Adopt P.I.D. temperature control system for accurate control of the temperature
▲ Standard with auto start and intermittent working function, convenient for start/stop of the machine and energy saving.
▲ Featured with overheat alarm, phase sequence error and motor overload alarm;
▲ Compact design, easy maintenance and low failure rate.

Produk Profile

Why You Should Use a Honey Dehumidifier (Wɛ̈ɛ̈r dɛ̈n ba Honey Dehumidifier luɔ̈ɔ̈i)
Plastic products become secondary products or bad products, its majority reasons because before forming plastic has not adequately dehumidified drying caused, especially highly absorbable plastic such as PET, PA, PMMA, PBT etc., practice demonstrated reducing dry wind dew point to -40°C below, while controlling heat so that it blows over the moisture-containing plastic particles surface, to make it before forming its moisture content to 0.02% below.

Why to use Honeycomb Dehumidifier
If your product has such problems which are regarded as low grade or bad quality as shown on the left, for most of the cases, the reason is that the raw materials are not completely dried before moulding, especially for hygroscopic engineering plastic materials, such as PET,PA,PMMA,PBT,etc As practically proved, only air flow of high temperature and low dew-point down to -40 ℃ can make the hydrous plastic materials to reach moisture content below 0.02%before moulding